Kobalt 0857432 Manual De Instrucciones página 27

ASSEMBLY INSTRUCTIONS FOR ROUTER TABLE
20. Attaching the Legs to the Tabletop
a. Place the router table surface assembly on a
flat, level surface, with the underside of the
table facing up.
b. Position a leg against the underside of the
tabletop surface as shown.
c. Align the two slots on the router table surface
assembly with the holes in the leg bracket.
d. Place a spring washer and a small washer onto
each of the two short hexagon socket screws
(af). Insert the screws up through the slots in
the router table surface assembly and screw
them into the nuts that are integrated into the
holes in the leg bracket. Tighten the hexagon
socket screws with the double ended wrench.
e. Repeat with the other leg.
f. Invert the router table surface assembly with
the two legs on a flat, level surface, with the
upside of the table facing up.
g. Insert the nut (ae) along the slot on the table
leg and be aligned with the hole in the table
surface. Then screw the hexagon socket screw
(af) into the nut. Tighten it with the double
ended wrench.
h. Repeat with the other leg.
20d
20g
27
af
af
ae