Levenhuk DTX TV Guia Del Usuario página 4

Power saving
Select Auto Power Off from the main menu II and set the idle time before the
microscope automatically shuts down. Press Capture/OK button (8) to confirm
selection.
Language
Select Language from the main menu II and choose one of the existing settings.
Press Capture/OK button (8) to confirm selection.
TV connection
Select TV Mode from the main menu II and then select, between NTSC and PAL, the
correct mode compatible with your TV. Press Capture/OK button (8) to confirm
selection.
Display frequency
Select Frequency from the main menu II and choose one of the existing settings.
Press Capture/OK button (8) to confirm selection.
Format MicroSD card
Select Format SD from the main menu II to format the installed memory card. All
the files on the card will be deleted after card formatting. Normally card
formatting is not necessary, unless your card is not able to store the captured
image.
Settings reset
Select Default Setting from the main menu II to revert back to factory settings.
Hardware version
Select Version from the main menu II to check the current hardware version.
File
Photos Directory: set a directory for captured images.
Videos Directory: set a directory for recorded videos.
Options
Resolution: set image resolution.
Date/Time: hide or display date and time of capture during preview.
Language: change the language of the user interface.
XY Guide: hide or display a grid on images.
Full screen mode: go full screen.
Capture
Photo: capture an image.
Video: record a video.
4
Save as
Copy to clipboard
Copy file
Previous image
Next image
Undo the last action
Repeat the last action
Capturing an image
Click the corresponding icon on the toolbar or select Photo from the Capture menu.
Recording a video
Click the corresponding icon on the toolbar or select Video from the Capture menu.
Sequence capture
Click the corresponding icon on the toolbar. A dialog window will appear where you can set
a number of parameters for sequence capture. Click the Photo radio button to set the time
to begin capturing images, interval between them and the total number of images. Click the
Video radio button to set the time to begin recording videos, their duration, interval
between them and the total number of clips.
Draw
Text
Measurement
Calibration