Technical Data; Preparatory Steps - Erreka MOLE MO120 Manual De Instrucciones

TECHNICAL DATA

Max. leaf lenght*
Power supply
Idling current
Maximum current absorption
Maximum power
Nominal power
Capacitor
Opening time (90°)
Maximum torque
Working temperature
Thermal protection
Working cycle
Motor weight
Protection
The new series of actuadors MOLE, has been devised to serve gates up to 800 Kg with
leaf up to 3 meters wide (look at the table technical data). Before proceeding with the
installation, please make sure that your gate opens and closes freely, and that:
• Hinges and pins are in optimum condition and properly greased.
• No obstacles are within the moving area.
• There is no friction with the ground or between the leaves.
• Your gate shall be equipped with central
fundamental for the good system operation.
Max. leaf lenght

PREPARATORY STEPS

MO120 (120V)
2 x 800 Kg
2,5 x 550 Kg
m
3 x 400 Kg
3,5 x 350 Kg
V / Hz 120 / 60
A 3
A 4,8
W 500
W 350
µF 35
s 15
N m 320
°C -20 ÷ +55
°C 150
% 30
Kg 11
IP 67
* WARNING: if it is installed the accessory device for
opening up to 180° (code AMO02), the maximum length of
the wing is 2,5m for a maximum weight of 400Kg
and side stops, which are
14
MO230 (230V)
2 x 800 Kg
2,5 x 550 Kg
3 x 400 Kg
3,5 x 350 Kg
230 / 50
1,5
2,4
500
350
14
17
320
-20 ÷ +55
150
30
11
67