cegard/Mini
Installation and Operation Manual
IMPORTANT NOTICE
WHEN THE CEGARD/MINI LIGHT CURTAIN IS USED AS A REPLACEMENT FOR
MECHANICAL SAFETY EDGES, IT IS THE RESPONSIBILITY OF THE INSTALLER TO
ENSURE THAT ON COMPLETION, THE INSTALLATION COMPLIES WITH ALL THE
RELEVANT STATE CODES, LOCAL CODES AND REGULATIONS THAT PERTAIN TO
INFRARED AND PHOTOELECTRIC DOOR PROTECTION DEVICES!
IN CANADA, PARTICULAR ATTENTION SHOULD BE GIVEN TO CLAUSES 2.13.5.1 AND
2.13.5.2 CAN/CSA-B44-B89!
CEGARD/MINI MUST BE INSTALLED ONLY BY AUTHORIZED AND FULLY TRAINED
PERSONNEL!
DO NOT USE THIS PRODUCT FOR THE PROTECTION OF DANGEROUS MACHINERY
OR IN EXPLOSIVE ATMOSPHERES OR RADIOACTIVE ENVIRONMENTS! USE ONLY
SPECIFIC AND APPROVED TYPES OF SAFETY DEVICES FOR SUCH APPLICATIONS,
OTHERWISE SERIOUS INJURY OR DEATH OF PERSONNEL MAY OCCUR!
Ex
© CEDES/July 2010
2
www.cedes.com