To Adjust The Balance Xt Harness - Husqvarna 545FR Manual Del Usuario

To adjust the Balance XT harness

Product overview on page 2 for an overview of
Refer to
the harness.
1. Stop the engine.
2. Push the safety-release mechanism down to release
the product from the harness.
3. To adjust the harness to the operator's height:
a) Push the spring loaded lock.
b) Turn the shoulder strap harness.
c) Move the shoulder strap harness to an applicable
hole on the back plate.
4. Attach the strap (A) in correct position for grass
clearing or forestry clearing.
5. Tighten the hip strap tightly. Make sure that the hip
strap aligns with the hip.
6. Push the 2 parts of the breastplate together as
shown.
7. Attach the side belt to the breastplate.
14
8. To decrease the pressure on the rib cage and
9. Tighten the elastic strap (B) to move more load from
10. Adjust the shoulder strap to make the product weigh
A
11. Adjust the side straps around the rib cage until the
12. Adjust the height of the suspension point. Refer to
shoulders, connect the side strap with the strap to
the hip pad. Recommended for women.
the shoulder strap to the hip strap.
B
equally on your shoulders.
breastplate is aligned with the center of your chest.
Product overview on page 2 . For forestry clearing,
the correct height of the suspension is approximately
10 cm/4 in below your hip.
1018 - 005 - 08.06.2020