Publicidad
Idiomas disponibles
Idiomas disponibles
Lfd.
St. Bezeichnung
57
1 Lager mit Gewinde
58
2 Stahldraht
59
1 Druckstift Pendellock
60
1 Drucköse Pendellock
61
1 Stahldraht
62
1 GFK - Feder
63
5 Klettband Velourseite
64
2 Klettband Hakenseite
Servorahmensatz
70
4 Servorahmen für Flaps / Querruder
71
2 Servorahmendeckel m. Hutze links / QR/Flaps
72
2 Servorahmendeckel m. Hutze rechts / QR/Flaps
73
16 Schrauben / Servorahmendeckel
Drahtsatz
80
2 Stahldraht / Ruderanlenkung
81
1 Seitenruderlager
BUILDING INSTRUCTIONS
High-performance electric-powered glider
Dear fellow modeller,
Congratulations on your choice of the Alpina 4001
ELEKTRO high-performance electric glider. This model
offers an excellent performance, and we hope you will
thoroughly enjoy building and flying it.
MULTIPLEX model kits are subject to constant quality
checks throughout the production process, and we
sincerely hope that you are happy with the contents of your
kit. However, we would ask you to check all the parts before
you start construction, as we cannot exchange
components which you have already worked on. If you
find any part is not acceptable for any reason, we will
readily correct or exchange it. Just send the component to
our Model Department; please be sure to include a brief
description of the fault.
We are constantly working on improving our models, and
for this reason we must reserve the right to change the kit
contents in terms of shape or dimensions of parts,
technology, materials and fittings, without prior notification.
Please understand that we cannot entertain claims against
us if the kit contents do not agree in every respect with the
instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft,
are by no means playthings. Building and operating
them safely requires a certain level of technical
competence and manual skill, together with discipline
and a responsible attitude at the flying field.
Errors and carelessness in building and flying the model
can result in serious personal injury and damage to
property. Since we, as manufacturers, have no control
over the construction, maintenance and operation of
our products, we wish to take this opportunity to point
out these hazards, and to emphasise your personal
responsibility.
Verwendung
Höhenruderlager
Höhenruder
Höhenruder
Höhenruder
Kabinenhaube
Kabinenhaube
Kabinenhaube/Akku
Akkurutsche
Tragflächen
Servorahmen
Servorahmen
Servorahmen
Höhe / Seite
Seitenruder
Alpina 4001 Elektro
Kit contents (for details see Parts List)
1 Pair wing panels with full-contact spars, joiner system
installed.
aerodynamically efficient wingtips, machined wing servo
wells, sanded trailing edges. Aileron and camber-changing
flap lining strips in place under wing skins, machined
control surface hinge lines. Designed for optional airbrakes
(installation described).
1 GRP / CFRP fuselage with integral MULTIlock wing
retainer system, factory-fitted control sleeves and hard
white surface finish
1 CFRP canopy
1 Pair tailplane panels with finished leading edges, sanded
trailing edges, joiner system installed, finished tips
1 Rudder, finished
1 Bag wooden parts including machined servo plate
1 Bag top-quality small hardware items
1 Bundle wire and rod
1 High-quality steel wing joiner rod
1 Name placard sticker set
1 Set building instructions
Specification: Alpina 4001 ELEKTRO
Wingspan:
Fuselage length:
Wing area (FAI):
Weight, according to
finish and fittings:
Wing loading (FAI):
Wing section:
Tailplane section:
Material
Messing-Rohr
Federstahl
Kunststoff
Kunststoff
Stahl
GFK
Kunststoff
Kunststoff
Kunststoff
Stahl
Federstahl
Alu-Draht
Order No. 21 4164
Finished
leading
Abmessungen
Ø 3 x M5 x 17 mm
Ø 3 x 130 mm
Fertigteil
Fertigteil
Ø 3 x 30 mm
1,5 x 15 x 150 mm
30 x 60 mm
30 x 60 mm
Spritzteil
Spritzteil
Spritzteil
M 2 x 10 mm
Ø 1,3 x 1400 mm
Ø 2 x 400 mm
edges,
finished
4001 mm
1690 mm
80.6 dm²
approx. 4900 g
approx. 61 g/dm²
RG sections, mod.
NACA 0009
15
Publicidad
