Service Indicator; Service Indicator Status; Items Supplied; Technical Data - Hilti TE 70-ATC Instrucciones De Uso

• This product is not suitable for working in a damp environment.
3.5 Active Vibration Reduction
The tool is equipped with an Active Vibration Reduction (AVR) system which
reduces vibration noticeably.
3.6 ATC
The product is equipped with the ATC (Active Torque Control) quick-acting
electronic cut-out.
If the accessory tool sticks or stalls, the product will suddenly pivot about
its own axis in the opposite direction. ATC detects this sudden pivoting
movement of the product and switches the product off immediately.
For ATC to function correctly, the product must be free to pivot.
After an ATC cut-out, switch the product off and then on again.

3.7 Service indicator

The product is equipped with a service indicator LED.

3.7.1 Service indicator status

Status
Service indicator shows.
Service indicator flashes.

3.8 Items supplied

Combihammer, side handle, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Store or at: www.hilti.group
4

Technical data

4.1 Combihammer
For details of the rated voltage, current, frequency and input power,
please refer to the power tool's country-specific type identification plate.
If the tool is powered by a generator or transformer, the generator or
transformer's power output must be at least twice the rated input power
shown on the rating plate of the tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the
rated voltage of the tool.
8 English
Meaning
End of service interval – servicing is
due.
Have the combihammer repaired by
Hilti Service.
2244432
*2244432*