Complete Installation - Whirlpool ACE184XL0 Manual De Uso

1. Center air conditioner in window. Check that lower rail of air
conditioner is behind and against back side of windowsill.
Lower window sash to hold cabinet in place.
NOTE: Your model may differ from the one shown.
A
B
A. Window sash
B. Lower rail behind back side of windowsill
C. Top channel
2. Pull left-hand curtain out until it fits into the window channel.
Repeat with right-hand curtain.
Attach side curtains to window
1. Insert one of the #8 x ³⁄₄" slotted wood screws through left-
hand curtain and into the window channel to fasten the
curtain to the window sash.
2. Repeat for the right-hand curtain.
NOTE: Your model may differ from the one shown.
Front view
A
B
A. Hole in #8 x
B. Side curtain
Top view
B
A
A. Side curtain against window channel
B. Window channel
³⁄₄
C. #8 x " slotted wood screw
C
³⁄₄
" slotted wood screw
C

Complete Installation

1. Insert foam seal behind the top of the lower window sash and
against the glass of the upper window.
A
A. Top of lower window sash
B. Foam seal
2. Place window-lock bracket on top of lower window and
against upper window sash.
3. Use a ³⁄₃₂" drill bit to drill a starter hole though the hole in the
bracket.
4. Attach window-lock bracket to window sash with one of the
#8 x ³⁄₄" slotted wood screws to secure window in place.
A
B
A. Upper window sash
B. Window-lock bracket
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
5. Plug into a grounded 3 prong outlet.
6. Press RESET on the power supply cord.
B
7