Complete Installation - Whirlpool CA10WXP0 Manual De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Top view
2
1
1. Side curtain against window channel
2. Window channel
3. #8 x ³⁄₄ in. round-head screw
3. Check that air conditioner cabinet is tilted to the outside so
that water will run to the outside. If cabinet is not properly
positioned, reposition or shim cabinet to provide the proper
tilt.
4. Use a ³⁄₃₂ in. drill bit to drill starter holes through the holes in
the top channel into the window sash.
5. Attach top channel to the window with 2 - #8 x ³⁄₄ in. round-
head screws.
1. #8 x ³⁄₄ in. round-head screws
3
1

Complete Installation

1. Place window-lock bracket on top of lower window and
against upper window sash.
2. Use a ³⁄₃₂ in. drill bit to drill a starter hole through the hole in
the bracket into the window sash.
3. Attach window-lock bracket to window sash with #8 x ³⁄₄ in.
round-head screw to secure window in place.
1
2
1. Upper window sash
2. Window-lock bracket
4. Insert foam seal behind the top of the lower window sash and
against the glass of the upper window.
1
1. Lower window sash
2. Foam seal
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
5. Plug into a grounded 3 prong outlet.
2
7

Publicidad

Tabla de contenido
loading

Tabla de contenido