cecotec CONGA 5090 Manual De Instrucciones página 38

ENGLISH
2. Use the up and down direction buttons and the
use the left and right buttons to switch from hours to minutes and repeat the previous step.
3. Press the
2. Scheduling cleaning tasks
1. Hold down the
the hour will start blinking.
2. Use the up and down direction buttons and the
use the left and right buttons to switch from hours to minutes and repeat the previous
step.
3. Press the
4. To cancel the scheduled cleaning:
• Set the remote control's clock to 00:00 am and save it.
• Switch the robot off for 1 minute and switch it on again.
Note: The robot will beep to indicate all settings have been saved.
Warning: When the remote control's batteries are replaced, the clock and schedule times must
be set again.
38
button again to save the settings.
button for 3 seconds. The first 2 digits indicating
button again to save the settings.
button to set the current time. Then,
button to set the schedule time. Then,