Parts Description; Before The First Use - Tristar BP-2826 Manual De Usuario

Instruction manual
• Allow the device to cool down before you are going to remove or
replace spare parts.
• Do not use this appliance near direct heat sources.
• Make sure the cord does not touch the hot parts of the appliance.
• We advise to place a heat resistant coating between your table and the
appliance (this way you don't get burns on your table or table cloth).
• Do not use this appliance in the bathroom or near a sink filled with water.
If this appliance has fallen into the water do not under no circumstances
directly grab this appliance, but first pull the plug from the socket.
• Make sure that the cord is not hanging over the edge of the table or
counter, does not touch any hot surfaces or is coming directly into
contact with the hot parts of the appliance. Do not place the appliance
underneath or close to curtains, window coverings etc.
• Children should be supervised to ensure that they do not play with the
appliance.
• Keep the appliance and its cord out of reach of children less than 8 years.
* Competent qualified repair service: after sales department of the producer
or importer or any person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all danger. In any case you
should return the appliance to this repair service.
4

PaRTS DeScRIPTIoN

1. Handles
2. Baking plate
3. Grease tray
4. Thermostat
5. Temperature indicator
1
2
3

BeFoRe The FIRST uSe

• Take the appliance and accessories out the box. Remove the stickers,
protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
• We advise to place a heat resistant coating between your table and the
appliance (this way you don't get burns on your table or table cloth).
• Pull out the Oil Drip Tray and pour water to reduce smoke while
cooking. Do not pour water on the heating element.
• NOTE: Please do not use the appliance without water in the tray.
• Place the device in a well ventilated space.
• Place the supplied thermostat in the connection of the thermostat.
4
5