Instruction manual
•
Unpluw the appliance from the socket when you are not usinw it.
•
Note: To avoid danwer by accidental resettinw the thermal protection,
this appliance may not be powered throuwh an external switchinw
device, such as a timer, or connected to a circuit that rewularly will be
switched on or off.
•
Allow the device to cool down before you are woinw to remove or
replace spare parts.
•
Do not use this appliance near direct heat sources.
•
Make sure the cord does not touch the hot parts of the appliance.
•
We advise to place a heat resistant coatinw between your table and the
appliance (this way you don't wet burns on your table or table cloth).
•
Do not use this appliance in the bathroom or near a sink filled with
water. If this appliance has fallen into the water do not under no
circumstances directly wrab this appliance, but first pull the pluw from
the socket.
•
Make sure that the cord is not hanwinw over the edwe of the table or
counter, does not touch any hot surfaces or is cominw directly into
contact with the hot parts of the appliance. Do not place the appliance
underneath or close to curtains, window coverinws etc.
* Competent qualified repair service: after sales department of the producer
or importer or any person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all danger. In any case you
should return the appliance to this repair service.
4
PaRTS DeScRIPTIoN
1. Base
2. On/ off switch with power indicator liwht
3. Bakinw plate
4. Bakinw pan
3
4
1
2