6.12.4.4
Positioning tray
CAUTION
Improper lifting by attendants
Falling, tipping over of the user due to lifting by removable components
X The product must not be lifted by the positioning tray�
NOTICE
Overloading
Damage to the product through user error
X Positioning trays must not be loaded with heavy objects�
INFORMATION
X Please note that the positioning tray can be used only when the seat is facing forward�
The seat can be equipped with a positioning tray on which objects can be placed directly next to the seat�
The positioning tray is mounted on the seat and secured against rotation�
Mounting the positioning tray
1�
Remove armrest pads if any�
2�
Slide the L-shaped track on the underside of the tray over the armrests from the front until the armrest is entirely
enclosed by the track (see Fig� 57)�
3�
Fasten the attached belts behind the backrest (see Fig� 58)�
Removing the positioning tray
1�
Open the belt behind the backrest�
2�
Pull the positioning tray off the armrests to the front�
3�
Reattach armrest pads if any�
Adjusting the tray position
1�
The height is adjusted via the armrest height adjustment�
6.12.5
Canopy
CAUTION
Exposed pinch points
Crushing, pinching due to incorrect handling
X When folding out the backrest, only grip by the specified components�
MPS
57
Settings and use
58
Ottobock | 25