Elevation And Windage Adjustment; Rotation Indicator Pin - KAHLES K4i Manual De Instrucciones

7 ELEVATION AND WINDAGE ADJUSTMENT

KAHLES riflescopes have adjustable elevation and
windage dials with mechanical and audible clicks. On the
K4i this is only possible with a coin or cartridge case. Each
click moves the point of impact towards the direction which
is engraved on the turrets.
Pay attention, never use any strong force when you do any
adjust ments on the turrets.

8 ROTATION INDICATOR PIN

Double turn turret
There are two rows of numbers
(X) on the elevation adjustment. If
the indicator pin (7) is flush to the
top of the adjustment you are
using the bottom row of numbers
(first rotation). If the indicator pin
is raised up, you are using the upper row of numbers
(second rotation).
At the K318i the pin's lifting is shown graphically by a
raising post.
Triple turn turret
There are three rows of
numbers (X) on the elevation
adjustment. If the indicator
pin (7) is flush to the top of
the adjustment you are using
the bottom row of numbers
(first rotation). If the indicator
pin is raised up about 1 mm (red), you are using the middle
row of numbers (second rotation). If the indicator pin is
raised up about 2 mm off the housing (white and red), the
highest row of numbers (third rotation) is in use.
7
X
symbolic picture
7
X
symbolic picture
27
E