Safety Instructions; Mechanical Center - KAHLES K4i Manual De Instrucciones

Ocultar thumbs Ver también para K4i:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3 SAFETY INSTRUCTIONS

• Never look directly into the sun or any other intense
light through your rifle scope
• Please protect your rifle scope from excessive solar
radiation and heat
• Please note the eye relief distance specified for
properly mounting the rifle scope
• All repairs must be performed by KAHLES
• The rifle scope must be mounted by professional
gunsmith
• Attention – the screws of mounts shall in no case be
tightened stronger than max. 240 Ncm / 21 in lbs
• Always check carefully and be certain that your firearm
is unloaded before undertaking any work upon it

4 MECHANICAL CENTER

The reticle has been factory-set to optical center. If you
need to reset it anyhow, follow these steps:
1. Turn the elevation or windage adjustment until it stops
(do not force).
2. Now turn the adjustment in the opposite direction while
counting the total number of clicks until it stops.
3. Half of this total number of clicks is the optical center.
4. Repeat this procedure for the second adjustment turret.
Pay attention, never use any strong force when you do any
adjust ments on the turrets.
E
21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

K16iK18iK312iK318iK525iK624i ... Mostrar todo

Tabla de contenido