Quick Menu - Bosch Kiox Instrucciones De Servicio

English – 16
ton (9). You can use the button < (10) to go back to
the previous menu from any settings menu.
You can find the following superordinate sections on
the first navigation level:
– <Registration> – Registration notification:
This menu item is only shown if you have not yet
registered on eBike Connect.
– <My eBike> – Settings for your eBike
You can reset the counters (such as the number of
kilometers traveled that day or average values) to
zero either automatically or manually, and you can
reset the range. You can change the wheel circum-
ference value that was preset by the manufacturer
by ±5 %. If your eBike features eShift, you can also
configure your eShift system here. The bicycle
manufacturer or dealer may base the service date
on the distance traveled and/or a period of time.
The due date for the service is displayed under
<Next Service: [DD. Mon. YYYY] or at [xxxxx]
[km]>. The bike component page displays the se-
rial number and hardware and software versions
for each component, in addition to other key data
that is relevant for the components.
– <My profile> – Active user data
– <Bluetooth> – Switch the Bluetooth® function on
or off:
Connected devices are displayed.
– <Sys settings> – A list of options for adjusting the
settings of your on-board computer:
You can display the speed and distance in kilome-
ters or miles, display the clock in 12- or 24-hour
format, adjust the time, date and time zone and se-
lect your preferred language. You can reset the Kiox
to its factory settings, run a software update (if
available) and choose between a black or white de-
sign.
– <Information> – Information about your Kiox:
References to FAQs (frequently asked questions),
certifications, contact information, license informa-
tion
1 270 U20 XBK | (16.04.2020)
You can find a detailed description of each parameter
in the online operating instructions at
www.Bosch-eBike.com/Kiox-manual.

Quick Menu

Selected settings are displayed on the Quick Menu.
These settings can be changed even while riding.
You can access the Quick Menu via the select but-
ton (9). It cannot be accessed from the Status
screen.
The following settings can be changed via the Quick
Menu:
– <Reset trip data?>
All data on the journey so far is reset to zero.
– <eShift>
You can set the cadence here.
– <eSuspension>
This is where you can set a manufacturer-defined
shock absorption or suspension mode.
Bosch eBike Systems