JVC KW-R930BT Manual De Instrucciones página 28

DISPLAY SETTINGS
DISPLAY
DIMMER Dim the illumination.
OFF: Dimmer is turned off. Brightness changes to [DAY] setting.
ON: Dimmer is turned on. Brightness changes to [NIGHT] setting.
( [BRIGHTNESS])
DIMMER TIME: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: 18:00 ; [OFF]: 6:00)
DIMMER AUTO: Dimmer turns on and off automatically when you turn
off or on the car headlights. *
BRIGHTNESS Set the brightness for day and night separately.
1 DAY/NIGHT: Select day or night.
2 Select a zone. ( 23)
3 LEVEL 00 to LEVEL 31: Set the brightness level.
TEXT SCROLL *
2
SCROLL ONCE: Scrolls the display information once. ; SCROLL
AUTO: Repeats scrolling at 5-second intervals. ; SCROLL OFF: Cancels.
COLOR
PRESET Select illumination colors for the buttons on different zones separately.
1 Select a zone. ( 23)
2 Select a color for the selected zone.
• COLOR 01 to COLOR 49
• USER: The color you have created for [DAY COLOR] or
[NIGHT COLOR] is shown.
• COLOR FLOW01 to COLOR FLOW03: Color changes at different
speeds.
• CRYSTAL/FLOWER/FOREST/GRADATION/OCEAN/SUNSET/
RELAX: The selected color pattern is shown. *
when [ALL ZONE] is selected in step
24
ENGLISH
Default: XX
1
3
(Selectable only
1
.)
DAY COLOR Store your own day and night illumination colors for different zones.
1 Select a zone. ( 23)
2 RED/GREEN/BLUE: Select a primary color.
3 00 to 31: Select the level.
Repeat steps 2 and 3 for all the primary colors.
NIGHT COLOR
• Your setting is stored to [USER] in [PRESET].
• [NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your
car's headlight.
COLOR GUIDE ON: Changes the button illumination when settings are performed on
menu and list search. ; OFF: Cancels.
* 1
The illumination control wire connection is required. ( 33)
*
2
Some characters or symbols will not be shown correctly (or will be blanked).
*
3
If one of these color pattern is selected, the [ZONE 1] and [ZONE 2] illumination colors will
change to the default colors.