Radio - JVC KW-R930BT Manual De Instrucciones

GETTING STARTED
F/W UPDATE
UPDATE SYSTEM
F/W UP YES: Starts upgrading the firmware. ; NO: Cancels
xxxx (upgrading is not activated).
For details on how to update the firmware, visit
<http://www.jvc.net/cs/car/>.
FACTORY YES: Resets the settings to default (except the stored
RESET station). ; NO: Cancels.
CLOCK
TIME SYNC ON: The clock time is automatically set using the
Clock Time (CT) data in FM Radio Data System signal. ;
OFF: Cancels.
CLOCK ON: The clock time is shown on the display even when
DISPLAY the unit is turned off. ; OFF: Cancels.
ENGLISH
Select the display language for menu and music
РУССКИЙ
information if applicable.
By default, ENGLISH is selected.
ESPANOL

RADIO

"STEREO" lights up when receiving an FM stereo broadcast with sufficient signal strength.
Search for a station
1
Press repeatedly to select FM or AM.
2
Press to search for a station automatically.
(or)
Press and hold until "M" flashes, then press repeatedly to search for a
station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until "PRESET MODE" flashes.
2 Turn the volume knob to select a preset number, then press the knob.
The preset number flashes and "MEMORY" appears.
5
ENGLISH