Select
Menu
>
Settings
Depending on the settings, select
If the contacts or calendar are full, synchronizing may take up to 30 minutes
to complete, when synchronizing for the first time, or after an
interrupted synchronization.
USB data cable
You can use the USB data cable to transfer data between the memory card inserted
in the phone and a compatible PC or a printer supporting PictBridge. You can also
use the USB data cable with Nokia PC Suite.
To activate the memory card for data transfer or picture printing, connect the
data cable; when the phone displays
select
OK
and one of the following options:
Default mode
— to use the cable for Nokia PC Suite
Printing
— to print pictures directly from the phone using a compatible printer.
Data storage
— to activate the memory card for data transfer
To change the USB mode, select
cable
>
Default
mode, Printing, or
■ Call
Select
Menu
>
Settings
Call forwarding
— to forward your incoming calls (network service). Call forwarding
and call restrictions cannot be active at the same time. See
"Security," p. 52.
Anykey answer
>
On
except the left and right selection keys, or the end key.
Answer when fold is opened
you open the fold. If the setting is off, you must press the call key after you open
the fold.
Automatic redial
>
to connect the call after an unsuccessful call attempt.
1-touch dialing
>
On
1-touch dialing keys, 2 to 9. To dial, press and hold the corresponding number key.
Call waiting
>
Activate
while you have a call in progress (network service). See "Call waiting," p. 21.
Summary after call
(network service) of the call after each call.
>
Connectivity
Initializing sync
USB data cable connected. Select
Menu
>
Data
>
Call
and one of following options:
— to answer an incoming call by briefly pressing any key,
>
On
— to set your phone to answer a call when
On
— to set your phone to make a maximum of 10 attempts
and the names and phone numbers assigned to the
— to set the network to notify you of an incoming call
>
On
— to briefly display the approximate duration and cost
>
Data transfer
>
Server
or
Initializing
Settings
>
Connectivity
storage.
Call restrictions
S e t t i n g s
sync.
copy.
mode.,
>
USB data
in
49