Controls And Functions - Eizo FlexScan S2100 Manual Del Usuario

Prior to use
Package Contents
Check that all the following items are included in the packaging box. If any items are missing or damaged, contact your local
dealer.
NOTE
• Please keep the packaging box and materials for future movement or transport of the monitor.
□ Monitor
□ Power cord
□ Digital signal cable (FD-C39)
□ Analog signal cable (MD-C87)

Controls and Functions

1 Sensor
2 Input Signal Selection button
3
Mode button
4 Auto Adjustment button
5 Enter button
6 Control buttons (Left, Down,
Up, Right)
7 Power button
8 Power indicator
9 Security lock slot
10 Height adjustable stand
11 Input signal connectors
12 USB upstream port
13 Cable holder
14 USB downstream port
* ScreenManager is an EIZO's nickname of the Adjustment menu. (For how to use ScreenManager, refer to the User's Manual on
®
the CD-ROM.)
2
Installation
Adjustment menu
(*ScreenManager )
®
Power connector
The sensor detects ambient brightness. BrightRegulator function (page 5)
Switches input signals for display when two PCs are connected to the
monitor.
The button allows you to switch the display mode (page 4).
Performs the function to adjust the screen automatically. (analog input only)
Displays the Adjustment menu, determines an item on the menu screen, and
saves values adjusted.
• Chooses an adjustment item or increases/decreases adjusted values for
advanced adjustments using the Adjustment menu (page 5).
• or button: Displays the brightness adjustment window (page 5).
Turns the power on or off.
Indicates monitor's operation status.
Blue : Operating
Yellow : Power saving
Complies with Kensington's MicroSaver security system.
Adjusts the height and angle of the monitor screen.
Left: DVI-I connector/Right: D-sub mini 15-pin connector.
Connects the USB cable when using ScreenManager Pro for LCD Software
(for Windows).
For how to use the software, refer to the User's Manual on the CD-ROM.
Covers the monitor cables.
Connects the monitor to a USB peripheral device.
Setting/Adjustment
□ EIZO USB cable (MD-C93)
□ EIZO LCD Utility Disk (CD-ROM)
• User's Manual
□ Setup Manual (this manual)
□ PRECAUTIONS
□ Limited warranty
□ Recycling Information
□ Fixing screws: M4 × 12 mm 4PCS
Off : Power off
Troubleshooting
Hold the projection
to open/close the
holder.