Controls And Functions - Eizo FlexScan SX2461W Manual Del Usuario

Prior to use
Package Contents
Check that all the following items are included in the packaging box. If any items are missing or damaged, contact your local dealer.
NOTE
• Please keep the packaging box and materials for future movement or transport of the monitor.
□ Monitor
□ Power cord
□ Digital signal cable: FD-C39
□ Analog signal cable: FD-C16

Controls and Functions

Adjustment menu
(*ScreenManager )
®
1 2 3 4 5 6
1 Sensor
2 Adjustment Lock button
3 Input Signal Selection button
4 Mode button
5 Auto button
6 Enter button
7 Control buttons (Left, Down,
Up, Right)
8 Power button
9 Power indicator
10 Security lock slot
11 Power connector
12 Input signal connectors
13 USB port (Up)
14 USB Port (Down)
15 Stand
16 Cable holder
Option speaker (i·Sound L3)
17
mounting holes
* ScreenManager is an EIZO's nickname of the Adjustment menu. (For how to use ScreenManager, refer to the User's Manual on
®
the EIZO LCD Utility Disk (CD-ROM).)
2
Installation Setting/Adjustment
□ EIZO USB cable: MD-C93
□ EIZO LCD Utility Disk (CD-ROM)
□ UniColor Pro (CD-ROM)
□ Setup Manual (this manual)
□ PRECAUTIONS
□ Limited warranty
□ Recycling Information
□ Mounting Screws (M4 x 12mm, 4 pcs)
[SX2461W]
7 8 9 11
Detects ambient brightness. BrightRegulator function (page 5).
Locks the buttons to retain the display mode or the status adjusted or set.
Switches input signals for display when two PCs are connected to the monitor.
Allows you to switch the display mode.
Performs the function to adjust the screen automatically. (analog input only)
Displays the Adjustment menu, determines an item on the menu screen, and
saves values adjusted.
• Chooses an adjustment item or increases/decreases adjusted values for
advanced adjustments using the Adjustment menu (page 5).
• or button: Displays the brightness adjustment window (page 5).
Turns the power on or off.
Indicates monitor's operation status.
Blue: Operating
Complies with Kensington's MicroSaver security system.
Connects the power connector.
Left: Signal 1 (DVI-I connector), Right: Signal 2 (DVI-I connector)
Connect the PC to the monitor with a USB cable.
Connects a peripheral USB device.
Used to adjust the height and angle of the monitor screen.
Covers the monitor cables.
Used to attach the option speaker (i·Sound L3). (May not allowed to attach the
option speaker depending on the stand type.)
• User's Manual of this monitor
• UniColor Pro User's Manual
15
16
17
10
[SX2761W]
12 13 14
Orange: Power saving
Troubleshooting
(SX2761W only)
14
11 12 13
Off: Power off