SIBELSOUND
TEST DATA
Press
on the main screen to display a data table for the current test similar to the one below:
The rows indicate the ear and the type of test:
•
RA: right ear, air conduction
•
LA: left ear, air conduction
•
RO: right ear, bone conduction
•
LO: left ear, bone conduction
The columns show the examined frequencies with the
threshold values saved (in dB). Turn the Frequency
Setting (D) to move the table columns to the left and
right. To modify any of the table values, press the value
to display the main window, with the corresponding
intensity and frequency, in order to redefine such
threshold.
Note: if the data displayed refer to an automatic test
(Hughson-Westlake), this will be indicated in the top left
corner of the table with
Press
to view the masking values, displayed in brackets below each threshold values. If the test is performed without masking,
this button will be grayed out.
Press
to display the results of the selected diagnoses (see section 3.7)
Press
to save the test.
520-800-MUM · Rev 1.01
DUO
· User's manual
EN 21