Firmware Update; Transport And Storage - Sibelmed SIBELSOUND DUO Manual De Uso

SIBELSOUND

3.11. FIRMWARE UPDATE

DUO
The SIBELSOUND audiometer includes a feature to update the unit's program, and include all the improvements that
constantly develops for its products. Follow the steps below to update the firmware:
• Ensure that the unit is on and correctly connected to the computer via the USB cable.
• Press the Intensity Setting (B) 7 times and the Signal button (D) once to activate the firmware update mode.
• A start-up screen appears, while the system waits for the update file.
• From W50 Software, run the operation to send the update file (refer to the
• After checking that the file sent is correct, the unit updates the firmware automatically.
• Finally, the unit indicates if the firmware has been successfully updated.
• If an error occurs during the update process, the unit informs the user, and the program is not modified.
• Once the update process has been completed, press the screen to restart the unit.
Note: Do not cancel the firmware update process once started.

3.12. TRANSPORT AND STORAGE

DUO
The two SIBELSOUND models include a transport bag to store the unit and its accessories, for easy transportation. This bag can
also be used to store the unit when not in use. It is recommended to remove the batteries from the battery compartment if the
unit is not going to be used for over a week.
520-800-MUM · Rev 1.01
DUO
· User's manual
W50 Software user manual).
EN 29
SIBEL S.A.U.