Safety Notes - Monacor SA-160BT Manual De Instrucciones

Ocultar thumbs Ver también para SA-160BT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
Mini Stereo Amplifier
with Bluetooth Interface
These instructions are intended for users without
any specific technical knowledge . Please read
these instructions carefully prior to operation
and keep them for later reference .
All operating elements and connections de-
scribed can be found on the fold-out page 3 .
1 Overview
1 POWER indicator
blue amplifier switched on
The LED will flash when the mute
function is activated .
red
standby mode
2 LED LINE IN: will light up when the input
LINE IN (8) has been selected
3 LED BLUETOOTH: will light up when the
Bluetooth mode has been selected
flashes = no Bluetooth connection
lights up constantly = connection to the
Bluetooth source has been established
4 IR sensor for remote control signals
5 Control knob with two functions:
– to switch between the Bluetooth mode
(LED BLUETOOTH will light up) and the
line input (LED LINE IN will light up), press
the knob
– to adjust the volume, turn the knob
6 NFC section for fast establishment of a Blue-
tooth connection
7 Bluetooth antenna
8 Stereo input (RCA jacks) to connect an audio
source with line output level (e . g . CD player)
9 Stereo output (3 .5 mm jack) to route the
audio signal to a unit with line input (e . g .
active subwoofer)
10 Speaker connection terminals (screw termi-
nals with 4 mm banana jacks)
11 Low voltage jack to connect the power sup-
ply unit provided
12 POWER switch
8
chapter 6 .1 .1
1.1 Remote control (fig. 2)
Button Function
to switch between:
amplifier switched on  in standby mode
to switch to the input LINE IN (8)
to switch to the Bluetooth mode
to increase the volume
to reduce the volume
to mute / unmute the sound
to operate the Bluetooth source:
to go to the beginning of the title;
to go to the previous title with each
additional press of the button
to switch between pause mode and
replay mode
to go to the next title

2 Safety Notes

The unit (including power supply unit and re-
mote control) corresponds to all relevant direc-
tives of the EU and is therefore marked with
WARNING The power supply unit uses dan-
gerous mains voltage . Leave ser-
vicing to skilled personnel only .
Inexpert handling may result in
electric shock .
The unit is suitable for indoor use only . Protect
it against dripping water, splash water and
high air humidity . The admissible ambient
temperature range is 0 – 40 °C .
Do not place any vessel filled with liquid on
the unit, e . g . a drinking glass .
Immediately disconnect the power supply unit
from the socket
1 . if the amplifier, the power supply unit or
the mains cable is visibly damaged,
2 . if a defect might have occurred after the
unit was dropped or suffered a similar ac-
cident,
.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

0256010

Tabla de contenido