Soundcore Liberty Neo Manual De Usuario página 6

Double click the multifunction
L R
button on either one of the
2
earbuds
Reset
1 2
Soundcore
Liberty Neo
3
Soundcore
Liberty Neo
Soundcore
Liberty Neo
Reset the earbuds if you can only hear sound on one side:
1. Open the Bluetooth list on your mobile device and delete
"Soundcore Liberty Neo".
2. Make sure charging case still has enough power, place
theearbuds into the charging case, press and hold the
multifunction button on both earbuds for 8 seconds until the
LED indicator rapidly flashes red three times, then release
07 English
Activate Siri / other
voice control software
the button.
3. Take both earbuds out of the charging case at the same
time, the left earbud will automatically connect to the right
earbud. The connection is successful if the left earbud flashes
slowly and the right earbud flashes rapidly. If the connection
was unsuccessful, repeat steps 2-3 until the connection is
successful.
4. Open the Bluetooth menu on your mobile device, search for
"Soundcore Liberty Neo", then tap to select it.
Specifications
Specifications are subject to change without notice.
Earbud Input Rating
Charging Box Input Rating
Charging time
Playtime (varies by volume level
and content)
Weight (product net weight)
Impedance
Driver (full range)
Frequency response
Bluetooth version
Range
Please note that your rights under applicable law governing
the sale of consumer goods remain unaffected by the
warranties given in this Limited Warranty.
5 V 0.3 A
5 V 0.5 A
1.5 hours
5 hours
51 g / 1.8 oz
16 Ω
6 mm × 2
20 Hz - 20 KHz
V5.0
10 m / 33 ft
English 08