Putting The T3 Ip Telephone Into Service (I5) - Avaya T3 Compact Manual De Manejo

Familiarise yourself with your telephone

Putting the T3 IP telephone into service (I5)

Please read and follow the following instructions regarding the commissioning of an
Putting the T3 IP telephone into service (I5)
IP telephone.
Note
• IP specific settings are described in the user manual.
Connecting the telephone and logging on (I5)
GB
After connecting to the LAN (Local Area Network) and to the power supply (only if
the telephone is not powered via the LAN), the telephone software is activated and
after that a search starts automatically for a gatekeeper (responsible for access
authorisation). A gatekeeper is normally found. If this is the case, the log-in window
appears next:
... Enter extension number.
Scroll to the PIN menu item.
Confirm your selection. The idle display appears next. From now on you can
also be reached under the call number (extension number) that you have entered.
Note
• You can change the language for the log-in procedure.
• The log-in PIN is the same as the PIN you can use to unlock your locked tele-
phone. You can change the PIN in the lock menu.
• If you have cancelled a log-in procedure (i.e. you have left the log-in window using
the Escape key) in order to change or view settings in the menu, you can then log
back in again via the User administration menu item.
Logging out from telephone
When you want to log out of the telephone:
Press the "Menu" function key.
Scroll to the Log out menu item.
Confirm your selection. You are now logged out of this telephone. Another user
can now log on.
6
Enter PIN. The factory setting is "0000".
i
i