Adjusting The Audio For Wall Mounting; Replacing The Remote Batteries - Bose SOLO 5 Guía Del Usario

C A R E A N D M A I N T E N A N C E

Adjusting the audio for wall mounting

After wall mounting the soundbar, adjust the audio for better bass sound.
Press and hold for five seconds.
Tip: If you remove the soundbar from the wall, repeat to return the soundbar to default
audio settings.

Replacing the remote batteries

Replace both batteries when the remote control stops operating or its range seems
reduced. Use Alkaline batteries.
1. Slide open the battery compartment cover on the back of the remote.
2. Remove both batteries.
3. Dispose of the batteries according to the regulations in your area.
4. Insert two AA (IEC-LR6) 1.5V batteries or the equivalent. Match the + and – symbols
on the batteries with the + and – markings inside the compartment.
5. Slide the battery compartment cover back into place.
3 2 - E N G L I S H