Adjusting the Focus, Size, and Position of the Projected image
Focus
Size (Zoom)
Position (Lens shift)
Adjusting the tilt of the projector with the adjusters
When the projector is installed on an uneven
surface and the projected position is low, you
can adjust using the adjusters. To correct any
trapezoidal distortion of the projected
image, use the Keystone feature.
Notes
• Be careful not to let the projector down on your fingers.
• Do not push hard on the top of the projector with the adjuster extended.
• Since the Keystone adjustment is an electronic correction, the image may be deteriorated.
Displaying a pattern for adjusting an image
You can display a pattern for adjusting the projected image with the PATTERN key on the
Remote Commander. Press the PATTERN key again to restore the previous image.
12
GB
Projecting an Image