Adjusting The Size And Shift Of The Picture; Size Adjustment; Shift Adjustment - Sony VPH-G90E Manual De Instrucciones

Adjusting the Size And Shift of the Picture

SIZE adjustment

SHIFT adjustment

24
(GB) Projecting
The size and shift of the input picture can be adjusted to fit the screen in
the pro-user mode only.
Note
When you connect multiple input sources to the projector, such as when
using the switcher, adjust the picture size, picture shift and blanking for
each input signal. The information about the input signal is shown in the
INPUT INFO menu.
Adjust the picture size if it does not fit the screen.
1
Press the RGB SIZE key.
(Use the RGB SIZE key even for the signal other than RGB.)
2
Adjust the picture size with
the arrow keys.
V : The vertical size is
expanded.
v : The vertical size is
reduced.
b : The horizontal size is
expanded.
B : The horizontal size is
reduced.
To adjust precisely, press the RGB SIZE key again. The projector
enters the FINE adjustment mode, and you can fine adjust the size. By
pressing the RGB SIZE key again, the COARSE adjustment mode is
resumed.
3
Press the MEMORY key to save the adjustment data.
Resetting to the initial preset size
The picture size of the video signal can be reset to the initial preset size by
pressing the RESET key in RGB SIZE adjustment mode. (The picture size
of signals other than the video signal cannot be reset.)
If the picture needs to be shifted to fit the screen, adjust the position of the
picture.
1
Press the RGB SHIFT key.
(Use the RGB SHIFT key even for the signal other than RGB.)
R G B S I Z E A D J
C O A R S E
H c : [ 8 0 ]
H f : 8 0
V c : 8 0
V f : 8 0
Picture
Screen
ADJ: