About Hdmi - Pioneer SX-S30DAB Manual De Instrucciones

> Before Start > Part Names

About HDMI

Compatible Functions
HDMI (High Definition Multimedia Interface) is a digital
interface standard for connecting TVs, projectors, Blu-ray
Disc/DVD players, set-top boxes, and other video
components. Until now, several separate video and audio
cables have been required to connect AV components. With
HDMI, a single cable can carry control signals, digital video,
and digital audio (2-channel PCM, multichannel digital
audio, and multichannel PCM).
HDMI CEC functionality: By connecting devices and HDMI
cables that comply with the CEC (Consumer Electronics
Control) specification of the HDMI standard, a variety of
linked operation become possible between devices. You
can enjoy features such as linking input switching with the
input selector and players, control volume using the remote
controller of the TV, and automatically switching this unit to
standby when the TV is turned off. The unit is designed to
link with products that comply with the CEC standard, and
that linked operation is not always guaranteed with all CEC
devices.
ARC (Audio Return Channel): By connection a TV that
supports ARC with a single HDMI cable, you can not only
output the audio and video from this unit to the TV, but also
input the audio from the TV to this unit.
HDMI Standby Through: Even if this unit is in standby, the
input signals from AV components are transmitted to the TV.
Deep Color: By connecting devices supporting Deep Color,
video signals input from the devices can be reproduced on
the TV with even more colors.
x.v.Color™: This technology realizes even more realistic
colors by broadening the color gamut.
3D: You can transmit 3D video signals from AV components
to the TV.
> Install > Initial Setup
4K: This unit supports 4K (3840 a 2160p) and 4K SMPTE
(4096 a 2160p) video signals.
LipSync: This setting automatically corrects any
desynchronization between the video and audio signals
based on data from the HDMI LipSync compatible TV.
Supported Audio Formats
2-channel linear PCM: 32 kHz, 44.1 kHz, 48 kHz, 88.2
kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit
Multi-channel linear PCM: Maximum 5.1 channels, 32
kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192
kHz, 16/20/24 bit
Bitstream: Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS, DTS-HD High Resolution Audio, DTS-HD Master
Audio
DSD: Supported sampling rates: 2.8 MHz
Your Blu-ray Disc/DVD player must also support HDMI
output of the above audio formats.
Supported Resolutions
Copyright protection technology: HDCP1.4/HDCP2.2
Color space (Color Depth): 720 a 480i 60Hz, 720 a 576i
50Hz, 720 a 480p 60Hz, 720 a 576p 50Hz, 1920 a 1080i
50/60Hz, 1280 a 720p 24/25/30/50/60Hz, 1680 a 720p 24/
25/30/50/60Hz, 1920 a 1080p 24/25/30/50/60Hz, 2560 a
1080p 24/25/30/50/60Hz, 4K (3840 a 2160p) 24/25/30Hz,
4K SMPTE (4096 a 2160p) 24/25/30Hz : RGB/YCbCr4:4:4
(8/10/12 bit), YCbCr4:2:2 (12 bit)
4K (3840 a 2160p) 50/60Hz, 4K SMPTE (4096 a 2160p)
50/60Hz : RGB/YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit),
YCbCr4:2:0 (8/10/12 bit)
> Playback
Advanced Setup | Firmware Update | Others
E
N
55