Garant Gruppe 92 Manual De Instrucciones página 30

Fitting pallet truck bases to modular cabinets
The base feet (1) and base stretchers (2) are bolted to the sides of the
cabinet using the assembly kit supplied (A). The fascias of the pallet truck
DE
base are securely attached to the recesses in the outer parts of the base.
EN
Adjusting the sliding guides for the doors of the sliding door cabinet
The sliding door runs in the bottom rail on 2 roller bearings and is guided in
the top rail with 2 plastic sliding guides. Roller bearings (1) and plastic sliding
guides (2) can be replaced using a 17 mm ring spanner.
If misuse or overloading lead to nasty scraping or squeaking noises, the
sliding guides (2) can be adjusted using a 17 mm ring spanner.
FR
IT
ES
30
Sliding door cabinet must be horizontally levelled,
otherwise the sliding doors may jam.
Front of the base is
flush with the cabinet
Back of the base is
2 mm recessed.