Garment Locker; Upright Cabinets - Garant Gruppe 92 Manual De Instrucciones

5.2

Garment locker

The fascia of the base is securely attached to projections
in the outer parts of the base.
Garment lockers are bolted to each other by means of bolts
inserted through the cabinet shell from inside the cabinet.
5.3

Upright cabinets

The pull-out shelves are cantilevered and equipped with individual locking.
That means it is not possible to pull out more than one shelf at a time.
WARNING
Storage equipment must be installed on a stable and level ground.
It is essential that the cabinet is secured against tipping over.
The cabinet must be levelled, otherwise the function
of the pull-out frames is affected.
Cover (with 4 drilled holes),
for attaching to a base cabi-
net or top extension cabinet
Rear panel (with 4 drilled
holes) for attaching to
the wall
www.hoffmann-group.com
DE
EN
FR
IT
ES
37