Garant Gruppe 92 Manual De Instrucciones página 31

Adjusting the mobility unit (1-4) and push handle (5) on
modular cabinets up to 1200 mm in height
Insert both chassis stretchers (1) into the recesses in the floor of the cabinet.
Bolt a pair of ball bearing castors (2) and fixed wheels (3) through each of the
stretchers and into the cabinet shell, using the fixings supplied. A
mobility unit includes a push handle. See below for assembly.
CAUTION
Mobility units may not be fitted to cabinets taller than 1200 mm
high. The risk of tipping is greater if the cabinet is fitted with a pull-
out shelf or drawer.
The handle should be fitted on the same side as the castors.
Push handle (5) on modular cabinets
Remove the plastic sleeves from the cabinet shell; working from within the
cabinet shell, screw the self-tapping screws supplied through the cabinet
shell and into the push handle.
www.hoffmann-group.com
DE
EN
FR
IT
ES
31