Battery And External Units Power Supply (Battery & Lnb) - Promax PROLINK-4C Manual De Instrucciones

Lines/
System
frame
I 625/50
K 625/50
L 625/50
M 525/60
N 625/50
Table 4.- Selectable terrestrial analogue standards and their characteristics.
4.9.4.3 Battery and External Units Power Supply (Battery & Lnb)
This function allows you to check the charge state of the batteries, as well as
the supply current and voltage of the external units. From the TV operation mode,
simply press the rotary selector [4], select the Battery & Lnb function and press the
rotary selector [4] again. You will see a screen like the following one:
The top part of the screen displays the battery voltage (7.3 V in previous figure),
both numerically and with a bar graph. The arrow labelled Low below the horizontal bar
signals the low battery level where the battery should be charged. When batteries are
fully charged, battery voltage indication is 7.4 V or higher.
The bottom of the screen shows the voltage supplied to the external units (V EXT,
18.5 V in the figure above) and the current supplied (I EXT, 200.0 mA in the example).
To leave this function press the rotary selector [4].
Page 60
Channel Video/sound
Bandwidth
8
8
8
6
6
Figure 29.- Battery & Lnb function.
USER'S MANUAL. PROLINK-4C
Video
separation
6.0
6.5
6.5
4.5
4.5
Audio
Mode Mode
Neg FM
Neg FM
Pos AM
Neg FM
Neg FM
02/2003