Description Of The Inputs And Outputs; Rf Input; Rs-232C Serial Port - Promax PROLINK-4C Manual De Instrucciones

USER'S MANUAL. PROLINK-4C

5 DESCRIPTION OF THE INPUTS AND OUTPUTS

5.1

RF input

The RF input is through the RF
peak signal level should never exceed 130 dBµV.
5.2

RS-232C serial port

The PROLINK-4C incorporates an RS-232C serial port for data exchange with
a PC, a serial printer (i.e. our model CI-23) or to other devices. The signals in this
connector are described in Table 7.
Figure 50.- RS-232C connector. External view.
PIN No. SIGNAL
1 Carrier detect
2 Data Receive (RxD)
3 Data Transmit (TxD)
4 Data Terminal Ready (DTR)
5 Ground (GND)
6 Data Set Ready (DSR)
7 Request to Send (RTS)
8 Clear to Send (CTS)
9 Ring Indicator
Table 7.- Description of the RS-232C connector.
02/2003
[37] connector on the side panel. The
CHARACTERISTICS
(not connected)
Fixed at +12 V
(not connected)
(not connected)
Page 95