Input Ts; Nicam Channel - Promax PROLINK-4C Manual De Instrucciones

Figure 36.- Attenuation measurements in a plug.
In order to finish of measuring, press the rotary selector [4] and select from
FUNCTIONS menu the End Test option.
4.9.4.15

Input TS

The Input TS function enables the Transport Stream MPEG-2 / DVB signals to
be controlled. There are three possibilities:
Automatic
Internal TS
External TS
To select the Scart operation mode, access the TV mode functions menu for
digital channels, turn the rotary selector [4] to the Input TS function and press to
activate it. The monitor will show a screen labelled TRANS. STREAM displaying the
three available options (as well as the Exit option). Turn the rotary selector [4] to the
mode you require, then press to activate it.
4.9.4.16

NICAM Channel

Use this function to verify NICAM sound modulations in stereo and dual, you
can also select the sound channel coming over the speaker.
To change the decoded channel access the TV mode functions menu, select
the Nicam channel function, and press the rotary selector to activate it. The monitor will
show a screen labelled NICAM offering two possibilities: Channel A and Channel B.
Turn the rotary selector [4] to the desired option and finally press to activate.
Page 72
10
FU N C IO N ES
0
-10
-20
1050.0 MHz
1575.5 MHz
REF. 90.0 dBuV
78.0 dBuV
PLUG
12.0
ATT.
Represents the TS coming from the input connector [40] or
otherwise, from the internal demodulator.
Represents the TS generated by the internal demodulator.
Represents the external TS coming from the input
connector [40].
USER'S MANUAL. PROLINK-4C
2100.0 MHz
91.0 dBuV 90.5 dBuV
74.3 dBuV 65.0 dBuV
16.7 25.5
02/2003