To ARC TV
a
a HDMI cable
Contents
Connections
≫
If the TV supports the ARC (Audio Return Channel) function (*), use only the
HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the
TV for connection. You connect the HDMI cable to the port labeled OUT on the
receiver side.
• If a 4K high-quality video is played, use a Premium High Speed HDMI Cable
or Premium High Speed HDMI Cable with Ethernet whose package has a
"PREMIUM Certified Cable" label.
Setup
• Settings are required to use the ARC function. Select "Yes" for "2. ARC Setup"
in Initial Setup (
Setup menu after Initial Setup is completed. Pres
and set "5. Hardware" - "HDMI" - "Audio Return Channel" to "On". (
• For detailed settings for TV connection, CEC function and audio output, refer
to the instruction manual of the TV.
(*) ARC function: This function transmits the audio signals of the TV via an
HDMI cable, and plays the audio of the TV on this unit. Connection to an ARC-
compatible TV is complete with one HDMI cable. To check if the TV supports the
ARC function, refer to the instruction manual of the TV, etc.
TV
30
Playback
≫
p85). If "No, Skip" is selected, settings are required in the
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫
≫
on the remote controller,
p80)