Connecting Playback Devices; Connecting An Av Component With Hdmi Jack Mounted - Pioneer HTP-076 Manual De Instrucciones

Connecting Playback Devices

Connecting an AV Component with HDMI Jack Mounted

a
BD/DVD
GAME
a HDMI cable
Contents Connections
≫
This is a connection example of an AV component equipped with an HDMI jack.
When connecting with an AV component that conforms to the CEC (Consumer
Electronics Control) standard, you can use the HDMI CEC function (*) that
enables linking with input selectors, etc. and the HDMI Standby Through function
that can transmit video and audio signals of the AV component to the TV even if
this unit is in standby mode. Also, the POWER OUT port on the rear panel can
supply power (5 V/1 A) to a streaming media player connected to HDMI IN jack
of this unit. To supply power even when this unit is in standby mode, change the
setting value of "USB Power Out at Standby" (
• If a 4K high-quality video is played, use a Premium High Speed HDMI Cable
or Premium High Speed HDMI Cable with Ethernet whose package has a
"PREMIUM Certified Cable" label.
• The POWER OUT jack cannot support playback of music files or power supply
to smart phones/tablets, or other devices.
Setup
• The HDMI CEC function and HDMI Standby Through function are
Streaming media
automatically enabled if you select "Yes" for "2. ARC Setup" in Initial Setup
player
( p85). If "No, Skip" is selected, settings are required in the Setup menu
after Initial Setup is completed. Press
"5. Hardware" - "HDMI" to make the settings. (
• To enjoy digital surround sound including Dolby Digital, set the audio output of
the connected Blu-ray Disc player etc. to the Bitstream output.
(*)The HDMI CEC function: This function enables various linking operations
Cable/Satellite
with CEC-compliant devices, such as switching input selectors interlocking with
set-top box
a CEC-compliant player, switching audio output between TV and this unit or
adjusting the volume using the remote controller of a CEC-compliant TV, and
automatically switching this unit to standby when the TV is turned off.
32
Playback
≫
p82) to "On".
on the remote controller, and select
p79)
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫ ≫