Taking Off Hot Fuse Links; Checking The Condition Of Fuse Links; Sealing; Sealing Of Measuring Holes - WEG FSW 100 Manual De Instrucciones

4.3. TAKING OFF HOT FUSE LINKS

Take off the cover (acc. to chapter 1.3);
g
Press the release button for locking of fuse links (acc. to chapter 4.2.) (Figure 19, 20);
g
Tilt the cover causing the self pulling out of fuse links from the fuse holders (Figure 21).
g

4.4. CHECKING THE CONDITION OF FUSE LINKS

Move a slide of the cover to the right in order to make clear the inspection holes (Figure 22);
g
Figure 22
Check the condition of fuse links for example by voltage measurement (Figure 23);
g
Move a slide of the cover to the left until it gets the neutral position (Figure 24).
g

5. SEALING

5.1. SEALING OF MEASURING HOLES

Move up the slide of a cover in order to seal a cover (Figure 25);
g
Pull a seal through a lug (Figure 26);
g
Move down the slide of the cover in order to release the slide (Figure 27).
g
Figure 25
Instruction manual for mounting and service of fuse switch disconnectors
Figure 21
Figure 23
Figure 26
www.weg.net
Figure 24
Figure 27
17