Taking Out The Fuse Links; Checking The Conditions Of The Fuse Links; Sealing The Disconnector; Sealing By Use Of The Wire Of The Seal - WEG FSW 250 Manual De Instrucciones

www.weg.net

4.2. TAKING OUT THE FUSE LINKS

Take off the cover (acc. to chapter 1.3);
g
Press the release button for locking of fuse links (Figure 19) and then withdraw and take
g
out the fuse link from the fuse holder (Figure 20).

4.3. CHECKING THE CONDITIONS OF THE FUSE LINKS

Move a slider of the cover upwards in order to expose the measuring points (Figure 21);
g
Figure 21
Make checking the conditions of the fuse links for example by voltage detector (Figure 22);
g
Move a slider of the cover downwards in order to cover the measuring points (Figure 23).
g

5. SEALING THE DISCONNECTOR

5.1. SEALING BY USE OF THE WIRE OF THE SEAL

Close the cover (acc. to chapter 1.2);
g
Seal the disconnector passing a wire through sealing eye 2 and handle 1 of the cover
g
(Figure 24).
16 Instruction manual for mounting and service of fuse switch disconnectors
Figure 19
Figure 22
Figure 24
Figure 20
Figure 23
Figure 25