Fixing Conductors With Live Terminals - Bridge Clamp Of S Type; Inserting, Taking Out And Checking Fuse Links; Inserting Fuse Links - WEG FSW 400 Manual De Instrucciones

3.2. FIXING CONDUCTORS WITH LIVE TERMINALS - BRIDGE CLAMP
OF S TYPE
Take off the cover (acc. to chapter 1.3);
g
Take off the shields for terminals (acc. to chapter 1.5);
g
Fix the conductors with M8 screws, 10 Nm (Figure 20);
g
Break down appropriate elements of shields for terminals (Figure 12, 13, 14, 15) and/or
g
(Figure 6, 17, 18, 19);
Mount shields for terminals (acc. to chapter 1.6);
g
Mount the cover (acc. to chapter 1.4);
g
The screw kit is compound by 12 M8 screw and 6 clips type S. Getting the customer's
g
discretion to use the M10 screw.

4. INSERTING, TAKING OUT AND CHECKING FUSE LINKS

4.1. INSERTING FUSE LINKS

Take off the cover (acc. to chapter 1.3);
g
Place the fuse link in a fuse holder (Figure 21);
g
Move a fuse link along the cover until the locking of fuse links is slammed
g
(Figure 22);
Mount the cover (acc. to chapter 1.4).
g
Instruction manual for mounting and service of fuse switch disconnectors
Figure 20
Figure 21 Figure 22
www.weg.net
15