Silvercrest SDR 1100 B2 Instrucciones De Uso página 49

If there is no more water in the water tank
steam lever is pressed
♦ Remove the plug from the mains power socket.
♦ Wait about 10 seconds.
♦ Open the safety valve
hissing out before unscrewing it completely.
♦ Fill the water tank
♦ Reclose the safety valve
If the mains water at your locality is rated as hard, it is recommended that you
mix the mains water with distilled water. Otherwise, the appliance could calcify
prematurely and clog the steam nozzle
To extend the optimal functioning of the appliance, mix the mains water with
distilled water as per the following table.
The water hardness level of your tap water can be queried at your local water
works.
■ 46 │ GB │ MT
. The water tank must be filled as follows:
8
slowly. Wait a few seconds for the steam to stop
3
with water.
8
.
Water hardness
very soft/soft
medium
hard
very hard
3
, no steam will come out when the
6
.
Ratio of distilled water
to mains water
0
1:1
2:1
3:1
SDR 1100 B2