Operating The Appliance - Silvercrest SDR 1100 B2 Instrucciones De Uso

Operating the appliance

1) Insert the plug into a mains power socket.
The red control lamp
the mains electricity.
2) As soon as the appliance is ready to use, the green control lamp
up. The red control lamp
NOTE
► While heating up, steam may occasionally escape from the steam nozzle
3) Press the steam lever
If the steam pressure drops, the green control lamp
Release the steam lever
NOTE
► If water drips out of the steam nozzle
pressure falls, release the steam lever
again. Wait until the green control lamp
► The steam cleaner has a thermal cut-out. It switches itself off automatically
in case of overheating (e.g. due to an empty water tank). If this happens,
pull out the mains plug and refill the water tank
WARNING! RISK OF INJURY!
► If you stop working for an extended period of time and leave the appliance
switched on, steam may occasionally escape even though the steam lever
is not pressed.
SDR 1100 B2
4
lights up to indicate that there is a connection to
4
stays lit.
downwards. Steam comes out of the steam nozzle
until the green control lamp
6
during operation or the steam
. The appliance needs to heat up
5
5
5
will go out.
5
comes back on.
lights up again.
3
.
GB │ MT │
lights
6
.
6
.
47 ■