Installing The Blade - Makita LS1019 Manual De Instrucciones

Sierra de inglete telescópica
Ocultar thumbs Ver también para LS1019:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2
4
5
► 1. Shaft lock 2. Hex wrench 3. Hex socket bolt (left-
handed) 4. Loosen 5. Tighten

Installing the blade

Mount the blade carefully onto the spindle, making
sure that the direction of the arrow on the surface of the
blade matches the direction of the arrow on the blade
case.
► 1. Arrow on the blade case 2. Arrow on the blade
Install the outer flange and hex socket bolt. Tighten the
hex socket bolt counterclockwise using the hex wrench
while pressing the shaft lock.
1
3
1
2
1
2
► 1. Hex socket bolt 2. Outer flange 3. Saw blade
4. Inner flange 5. Spindle
NOTICE:
If the inner flange is removed, be sure to
install it on the spindle with its protrusion facing away
from the blade. If the flange is installed incorrectly, the
flange will rub against the machine.
Return the blade guard and center cover to its original
position. Then tighten the hex bolt clockwise to secure
the center cover. Unlock the stopper pin to release
carriage from the raised position. Lower the handle to
make sure that the blade guard moves properly. Make
sure shaft lock has released spindle before making cut.
Connecting a vacuum cleaner
When you wish to perform clean cutting operation, con-
nect a Makita vacuum cleaner to the dust nozzle using
a front cuffs 24 (optional accessory).
► 1. Front cuffs 24 2. Hose 3. Vacuum cleaner
15 ENGLISH
3
4
5
1
2
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ls1019l

Tabla de contenido