Saving, Retrieving And Deleting Results; Cleaning And Storing The Instrument; Error Messages / Troubleshooting - Beurer BM 35 Manual De Instrucciones

Range of blood pressure values
Grade 3: Severe hypertension
Grade 2: Moderate hypertension
Grade 1: Mild hypertension
High-normal
Normal
Optimal
Source: WHO, 1999

6. Saving, retrieving and deleting results

• The results of each successful measurement are stored
together with date and time. With more than 60 items of
measured data, the earliest items of data measured are lost.
• Select the desired user memory by pressing the MEM button
and then the + button. Press the MEM button again to display
the average of all saved measurements in the user memory.
Press the MEM button again to display the average day meas-
urement for the last 7 days. (day: 5.00 a.m. – 9.00 a.m., display
). Press the MEM button again to display the average night
measurement for the last 7 days (night: 5.00 p.m. – 9.00 p.m.,
display ) . If you continue pressing the MEM button, the latest
individual results are displayed with date and time.
• To clear the memory, press the MEM button, then the dis-
play shows . Press the + button to select the user mem-
ory and confirm by pressing MEM again. Press and hold the
+ and keys simultaneously for 5 seconds (the display will
show ).
• If you wish to change the user memory, see "Select memory".
Systolic (in mmHg) Diastole (in mmHg)
≥180 ≥110
160 –179 100 –109
140 –159 90 – 99
130 –139 85 – 89
120 –129 80 – 84
<120 <80
20
Measure
Seek medical advice
Seek medical advice
Have it checked regularly by doctor
Have it checked regularly by doctor
Check it yourself
Check it yourself

7. Cleaning and storing the instrument

• Clean your device and cuff carefully only with a slightly
moistened cloth.
• Do not use detergents or solvents.
• On no account must you immerse the computer in water,
otherwise liquid can enter it and cause demage.
• When storing the device, make sure that no heavy objects
are placed on top of it. Remove the batteries. The cuff tube
should not have any sharp kinks

8. Error messages / troubleshooting

In case of faults, the _ message appears in the display.
Error messages can occur when
1. inflation pressure is higher than 300 mmHg,
2. blood pressure is unusually high or low
3. you move or talk during the measurement (in addition to
, the cardiac arrhythmia icon
4. the cuff tube is not inserted properly
5. the cuff is inflated for longer than 25 seconds
,
appears in the display ),
,
.