Prepare Measurement - Beurer BM 35 Manual De Instrucciones

Icons in the display:
1. "Change battery" icon
2. Error icon _
3. Systolic pressure
4. Cardiac arrhythmia icon
5. mmHg unit
6. Icon for users ,
7. Diastolic pressure
8. Time and date
9. Number of memory space
10. Pulse icon
11. Measured pulse
12. Risk indicator
13. Memory display day/night
(A,P: AM, PM)
8
5
1
9
4
11
4 x AAA (LR03) 1,5 V
2
6
3
12
13
7
10

4. Prepare measurement

Inserting battery
• Remove the battery cover from the back of the monitor.
• Insert four AAA 1.5 V alkaline batteries. Making absolutely
sure that you insert them with the correct polarity as marked.
Never use rechargeable batteries.
• Replace the battery cover carefully
If the battery change
urement is no longer possible and you must replace all the bat-
teries. Once batteries have been removed from the device, the
time must be reset.
The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling points
or electronics retailers. You are legally required to dispose of
the batteries.
The codes below are printed on batteries contain-
ing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
Setting date, time and language
It is vital to set the date and time. This is the only way that
measurements can be saved and recalled with the correct date
and time. The time is shown in 24 hour format.
Proceed as follows to set the date and time:
• Switch on the blood pressure monitor with the
• Press the function
17
is continuously illuminated, meas-
.
button.