Specifications; Product Identification; Product Description; Outfit - CAMPAGNOLA Falcon 260 Manual De Uso

3

- SPECIFICATIONS

3.1 Product identification

The details used to identify the motorcompressor are stamped on the nameplate (4).

3.2 Product description

Introduction
The motorcompressor is used to operate pneumatic tools for pruning, for harvesting olives and coffee and for clipping long-haired
animals. It can also be used for inflating, painting, blowing and for operating any other pneumatic tools.
- Model Falcon 260: it is manually moved by the operator and is fitted with the engine selfregulating device. It is available only
with gasoline engine.
- Model Falcon 520 and 820: it is operated by either a gasoline or a diesel engine.
Both models are fitted with a two-wheel drive, controlled by the operator, and can reach a speed of 3 km/h.
Both have a pneumatic selfregulating device, which stresses the engine only during the tank recharge, this way saving fuel
and parts wear.

3.3 Outfit

- Use & Maintenance Manual for the motorcompressor
- Use & Maintenance Manual for the engine
- Recipient with nozzle for oil filling
- Hose reel support pin

3.4 Recommended use

The motorcompressor is designed to supply compressed air as described above. If used improperly, it can be dangerous to the
operator. If the motorcompressor is not used as recommended, the manufacturer is entitled to void the warranty.
WARNING!
If it is not used for the purposes it was designed for, the motorcompressor may cause serious injury to personnel and
bystanders and damage to equipment and things.
Via Lazio n 21-23
Zola Predosa Bo Italy
TIPO
MOD.
COD.
N°MATR.
ANNO
kg
21 - 72