Pocket Transmitter
These instructions are intended for users
without any specific technical knowledge .
Please read these instructions carefully prior
to operating the unit and keep them for later
reference .
All operating elements and connections
de scribed can be found on the fold-out
page 3 .
1 Overview
1 Transmitting antenna
2 Power switch
3 LC display; indicates the transmission fre-
quency and the charging status of the
batteries during operation
4 Mini XLR connection for a headband
microphone or a tie-clip microphone
5 Key
for increasing the frequency (in the
frequency adjusting mode) and for activat-
ing the lock function (in the lock mode)
6 Key
for reducing the frequency (in
the frequency adjusting mode) and for
deactivat ing the lock function (in the lock
mode)
7 Key SET
with the unit not locked:
to call up and exit the adjusting modes
for frequency and lock function
☞
chapters 5 .1 and 5 .2 .1
with the unit locked:
to call up and exit the adjusting mode
for the lock function
8 Locking for the control part: to unlock the
control part, press down the two latch-
ing buttons so that it unlocks and can be
moved upwards (figs . 1, 2) or down wards
(fig . 3)
9 Belt clip (can also be mounted when it is
turned by 90° or 180°)
10 Gain control; for matching the input
sensi tivity, turn the control with the sup-
plied ad justing key
11 Battery compartment for two 1 .5 V bat-
teries of size AA (R6)
☞
chapter 5 .2 .2
2 Important Notes
This unit corresponds to all relevant directives
of the EU and is therefore marked with
•
The unit is suitable for indoor use only . Pro-
tect it against dripping water and splash
water, high air humidity and heat (admis-
sible ambient temperature range 0 – 40 °C) .
•
For cleaning only use a dry, soft cloth,
never use chemicals or water .
•
No guarantee claims for the unit and no
lia bility for any resulting personal damage
or material damage will be accepted if the
unit is used for other purposes than origi-
nally intend ed, if it is not correctly connect-
ed or operated or if it is not re paired in an
expert way .
If the unit is to be put out of operation
definitively, take it to a local recycling
plant for a disposal which is not harmful
to the environment .
3 Applications
This multifrequency pocket transmitter is
pro vided for connecting a headband micro-
phone or tie-clip microphone . In combination
with the multifrequency receiver TXS-871
from IMG STAGELINE, it makes up a wire-
less audio transmission system . Within the
UHF frequency range of 863 – 865 MHz, the
transmission frequency can be selected from
15 frequencies (frequency spacing 125 kHz) .
3.1 Conformity and approval
Herewith, MONACOR INTERNATIONAL de-
clare that the transmitter TXS-871HSE com-
plies with the directive 2014 / 53 / EU . The EU
declaration of conformity is available on the
Internet:
www .img-stageline .com
The transmitter is generally approved for
operation in EU and EFTA countries; it is
licence-free and requires no registration.
.
7