ENGLISH (Original instructions)
1.
Red indicator
2.
Button
3.
Battery cartridge
4.
Star marking
5.
Battery indicator
6.
Knob
7.
Housing
8.
Switch trigger B
9.
Switch trigger A
10. Lock-off button
11. Adjusting dial
12. Trimming direction
SPECIFICATIONS
Blade length
Strokes per minute (min
Overall length
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Noise
Model
L
PA
DUH551
DUH651
• Wear ear protection.
Vibration
Model
DUH551/DUH651
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
Explanation of general view
13. Hedge surface to be trimmed
14. Tilt the blades
15. Press
16. Chip receiver
17. Nut
18. Shear blade
19. Branch catcher
20. Hooks
21. Fit the hooks into groove
22. Grooves
23. Press the levers on both sides
24. Unlock the hooks
Model
-1
)
Sound pressure level
Uncertainty K
(dB (A))
(dB (A))
81.5
2.1
82
1.4
Declared emission (m/s
2.5
DUH551
550 mm
1,065 mm
5.1 kg
Sound power level
L
(dB (A))
PA
91
91.1
2
)
Uncertainty K (m/s
1.5
Symbol
ENG901-1
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
................... Do not expose to rain.
Cd
Ni-MH
Li-ion
25. Blade cover
26. Screws
27. Under cover
28. Plate
29. Crank
30. Oval hole of shear blade
31. Limit mark
32. Holder cap cover
33. Slotted screwdriver
34. Brush holder cap
1,000 - 1,800
D.C.36V
Applicable standard or
Uncertainty K
(dB (A))
1.5
1.5
Applicable standard or
2
)
....... Read instruction manual.
............. Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries
and Accumulators and Waste Batteries
and Accumulators and their
implementation in accordance with
DUH651
650 mm
1,135 mm
5.2 kg
directive
2000/14/EC
directive
EN60745
END013-4
7