Igniter - L.B.White Oval 80 HP Instrucciones Y Manual Del Propietario

Igniter

The tip of the igniter is exposed to a harsh environment
consisting of high temperatures and combustion prod-
ucts. Periodic servicing is required.
A. REPLACEMENT
1. Remove igniter mounting screws. See Fig. 13.
2. Lift and pivot the igniter until it clears the burner.
See Fig. 14.
DO NOT FORCE OR BEND THE IGNITER
DURING IGNITOR REMOVAL.
FIG. 13
SCREWS
FIG. 14
BURNER VANES
Oval 80 Radiant Tube Heaters
3. Pull the ignition cable's rubber boot from the igniter.
B. MAINTENANCE
1. Ensure the gap is 1/8 in. See Fig. 15.
2. Clean the electrode and ground rod using emery
cloth.
3. Ensure the insulative base of the electrode is not
cracked.
FIG. 15
ELECTRODE
Owner's Manual • Oval 80
19
GAP
(1/8 IN.)
GROUND ROD